The Height to Install Arts and Crafts Dining Room Lighting

You have a lot of things to consider when installing a arts and crafts dining room lighting on the ceiling of a room. The placement of the new lighting fixture should not only detract from the overall balance of the room, nor should it interfere with the flow of traffic . A light suspended on a table also requires special considerations.

There is no strict rule about the height at which a arts and crafts dining room lighting fixture must be installed on the furniture. The light should look good in the room and be functional. When hanging a light on a table, think about the activity that will usually take place at that table. The height of the artifact should leave enough room for the head so that it does not interfere with normal activity and, at the same time, provide the right amount of illumination for the task in question. A good rule of thumb is to initially hang the lamp between 30 to 36 inches (76 to 91 cm) above the table and adjust it until adequate lighting is achieved.

Chandeliers and chandeliers on a arts and crafts dining room lighting in a formal setting usually hang at a height that improves the decoration of the room. If the appliance is hung too low, it may decrease the overall attractiveness of table settings, especially if a large table top adorns the table. A table in a formal room is not usually used as a work area, but for entertainment and dining. Appearance, not enlightenment, is the key. In addition, the size of the lighting fixture will influence the height from which it must be hung.

Share.

Comments are closed.